Use and maintenance of belt conveyor

The conveyor of belt conveyor indicates that the conveyor belt should be kept clean during transportation and storage to prevent exposure to the sun or rain and snow, to avoid contact with chemical substances such as strong acid and strong alkali raw oil organic solution, and the distance between them should be less than one meter; During storage, the temperature in the warehouse should be maintained in the middle of -18 ℃ -40 ℃, and the relative temperature should be maintained in the middle of 50% - 80%; During the storage period, the goods must be placed in rolls, which are not scalable, and should be rolled once a quarter during the storage period. Conveyor belts of different types, specifications and models with superimposed layers are not suitable to be connected together, and their connectors can be connected with glue; The type, structure, specification and model of belt conveyor and the number of superimposed layers shall be adopted according to the application standard. Generally, the operation speed of the transportation adhesive tape is not suitable to exceed 2.5 m / s. low speed gear should be selected as far as possible for raw materials with large lumpiness and high abrasiveness and for the application of fixed type dumping equipment.

The relationship between the diameter of the transmission drum of the belt conveyor and the cloth layer of the conveyor belt, the supporting facilities of the transmission drum and the redirection drum and their provisions on the groove angle of the buffer idler should be based on the requirements of the design scheme of the transport aircraft. The feeding direction should be along the operation direction of the adhesive tape. In order to reduce the impact of raw materials on the adhesive tape when falling, the launder should be selected to reduce the landing distance of raw materials; The spacing of buffer idlers should be reduced and buffer idlers should be selected in the rubber receiving section. In order to avoid overflow, soft and appropriate baffle plates should be selected on the belt side to prevent the baffle plates from being solid and cutting the nylon conveyor belt surface of the conveyor belt.

Belt conveyor manufacturers should pay attention to the following matters in the application of conveyor belts:

(1) Prevent the buffer idler from being covered by raw materials, resulting in insensitive rotation, avoid overflowing materials from getting stuck between the barrel and the adhesive tape, pay attention to the moistening of part of the theme activity, but do not transport the adhesive tape with oil stains;

(2) Prevent operation with load;

(3) If the adhesive tape deviates in direction, correct measures should be taken immediately to correct it;

(4) If the conveyor belt is found damaged, it should be repaired or replaced immediately to prevent expansion.